How To Install Window Blinds In Washington DC

Numerous Washington DC homeowners turn to window blinds when they require more privacy and governance over natural light in their homes. They’re a functional and budget-friendly window treatment. They also require just a few steps to attach for experienced do-it-yourselfers. But, nothing beats the ease of hiring a qualified window treatment installer. Here are the essential steps of hanging window blinds and when to phone the professionals to do it for you.

Get Accurate Measurements

Prior to beginning, figure out if you should get inside-mount blinds or outside-mount. This crucial bit of info will help you see where to measure. Measure the width, depth, and height within your window frame for inside-mount blinds. When attaching outside-mount blinds, measure the width and height of your window, counting the trim, and add three inches to your measurements to make sure you get good coverage. Measure with precision–don’t round up or down. Poorly fitting blinds will not function satisfactorily.

Order Your Blinds

After you know your dimensions, you can shop for blinds. You may already know what type of blinds you wish to have. Get blinds that coincide with your measurements as closely as possible. Off-the-shelf blinds might not fit precisely, either sticking out too far or not meeting the end of the window completely. Make sure you are provided fasteners that let your blinds hang at the appropriate depth, too. You’ll need to choose specially made blinds and parts for the best fit.

Install Your Window Blinds

Your blinds should come with instructions. Use them to affix your exact product. If you wish to have a glimpse of how challenging it is to install window blinds in Washington DC, here are some common steps to give you a general idea.

 

Inside Mount Blinds

 

1. Place a bracket at the top of the inside of the window around one inch from the edge. Check that this positioning won’t obstruct the blind’s operation. Use a pencil to mark the bracket holes.
2. Drill pilot holes on your marks.
3. Line up the bracket holes where you drilled and secure with screws.
4. Duplicate these first three steps for the other bracket.
5. Place the end caps onto the headrail. Position the rail into the brackets.

Attach the tilt wand and try it out. Also, try out the pull cord.

Outside Mount Blinds

1. Decide if you’re attaching to the window trim or wall surrounding the window. Hold the headrail in place and make sure the blind reaches the bottom edge of the window.
2. Mark the outer edges of the headrail.
3. Measure four inches from your headrail marks and mark your bracket holes here.
4. Drill pilot holes in the proper spots.
5. Align the bracket holes with the drilled holes and attach with screws on both sides.
6. Fit the blind rail into the brackets.

Connect the tilt wand and test to ensure everything works.

Opt For The Easiest Way To Install Blinds 

Just a reminder, you don’t need to do blinds yourself. The most effortless way to install window blinds in Washington DC is to seek out an expert window treatment installer. They will assist you at every step. They’ll help you pick blinds that accommodate your needs and preferences, make accurate measurements for a made-to-order product, and attach them for you. They do this every day, so they’ll handle your job efficiently and correctly. They’ll know how to troubleshoot any concerns without wasting hours searching for help online. A window treatment expert will also provide higher-quality blinds than large retail outlets or online marketplaces.

Avoid The Hassle And Have Sunburst Shutters Install Your Window Blinds In Washington DC

Installing window blinds in Washington DC couldn’t be easier when you turn to Sunburst Shutters DC. We’ll help you choose custom blinds that will match your windows precisely, and our expert installation staff will attach them for you. All you need to do is call 240-339-2588 or complete the form on this page to schedule a no-cost in-home consultation.